Holz Slide-Lag

Authorized Holz stocking distributors carry inventories of standard pads, complete with required retainers, for application by system owners using the "butt seam" or "full width" method.

STYLE 5

Slide-Lag Traction Pads with standard 60 durometer industrial compound for use on drive pulleys, in 72" lengths, formed to specific pulley diameters. Also available in special compounds with standard or stainless steel (SS) backing plates.
(For additional information ask for Bulletin PL 101.)

"Slide-Lag's" rubber compound and chevron groves promote maximum traction.

Available in 3/4" Thick "HUSKY!"

STYLE 7

Slide-Lag Edge-Crown Traction Pads with standard 60 durometer industrial compound for use on drive pulleys, in 10" lengths, formed to specific pulley diameters. Normally used in combination with Style 5 pads to provide a crown on a flat face drive pulley. Also available in all special compounds and standard or stainless steel (SS) backing plates. (For additional information ask for Bulletin PL 100.)

Available in 3/4" Thick "HUSKY!"

STYLE 9

Belt-Saver Protection Pads are made from standard 40 durometer industrial compound for use on non-drive pulleys, in 72" lengths, formed to specific pulley diameters. For special service conditions, select from all special compounds with or without stainless steel (SS) backing plates.
(For additional information ask for Bulletin PL 10877 A.)

STYLE 11

Belt-Saver Edge-Crown Protection Pads standard in 40-durometer industrial compounds for use on non-drive pulleys, in 10" lengths, formed to specific pulley diameters. Typically used in combination with Style 9 pads to provide a crown on a flat face non-drive pulley. Available in the same compounds and backing plate combinations as Style 9 for special service conditions. (For additional information ask for Bulletin PL 10877.)

Click the icon for
more Slide-Laginformation.

You need Acrobat Reader to view
this information. A FREE copy
is available at the following link.