|
|||||||||||||||||||||
Holz Rubber Company offers a
wide variety of Flue Duct Expansion Joints, depending upon your
specific application requirements.
wide variety of Flue Duct Expansion Joints, depending upon your
specific application requirements.
Expansion Joints for
Ducting Systems
Designed specifically for typical ducting movements and applications
requiring standard movement, maximum noise reduction, vibration, and
sound absorption.
942 U-Design offers superior protection to duct systems, flanges and
equipment housing.
requiring standard movement, maximum noise reduction, vibration, and
sound absorption.
942 U-Design offers superior protection to duct systems, flanges and
equipment housing.
Click here for more
product information
product information
Style 945 W-Design Expansion Joint is the "workhorse" of the Holz styles.
Designed especially for scrubber, precipitator, baghouse and stack hot air or flue gas ducts, the Style 945 offers superior axial and lateral movement capabilities without pre-compression or pre-extension. The compound curve molded corners ensure that the reinforcing material is not pre-stressed at the neutral installed face dimension.
Designed especially for scrubber, precipitator, baghouse and stack hot air or flue gas ducts, the Style 945 offers superior axial and lateral movement capabilities without pre-compression or pre-extension. The compound curve molded corners ensure that the reinforcing material is not pre-stressed at the neutral installed face dimension.
Click here for more
product information
product information
Designed for ultra-high movement in short face-to face applications.
Primarily for positive pressure clean systems having ultra-high axial compression and extension movement.
Constructed with a large, high, "V"-shaped arch allowing very high axial movement while exerting very low forces on the ductwork, duct flanges
and equipment.
Primarily for positive pressure clean systems having ultra-high axial compression and extension movement.
Constructed with a large, high, "V"-shaped arch allowing very high axial movement while exerting very low forces on the ductwork, duct flanges
and equipment.
Click here for more
product information
product information
Designed for applications with constant operating temperatures above
400°F to 2000°F.
A TFE/glass heat-sealed gas and chemical barrier provide a completely
gas-tight, leak proof construction.
The composite-type, multi-layered construction consists of a fluoropolymer/ glass outer cover, fabric retainer plies, insulation thermal barrier, TFE/glass gas and chemical barrier, and a fiberglass and/or ceramic protective inner layer mechanically locked to the protective outer cover.
400°F to 2000°F.
A TFE/glass heat-sealed gas and chemical barrier provide a completely
gas-tight, leak proof construction.
The composite-type, multi-layered construction consists of a fluoropolymer/ glass outer cover, fabric retainer plies, insulation thermal barrier, TFE/glass gas and chemical barrier, and a fiberglass and/or ceramic protective inner layer mechanically locked to the protective outer cover.
Click here for more
product information
product information
You need Acrobat Reader to view the information on this page. A FREE copy is available at the following link.